• Why this diagram is necessary?

• Full overview of all things covered by the diagram 

• Simple examples how packet travels through the diagram 

• Routing 

• Bridging 

• Connection to router 

• More complex examples of diagram usage 

• Module 1 laboratory

• Connection tracking 

• Filter • Chains (default/custom) 

• All rule "actions" covered 

• Most common rule "conditions" covered 

• NAT 

• Chains (default/custom) 

• All rule "actions" covered 

• Most common rule "conditions" covered 

• NAT helpers • Mangle 

• Chains (default/custom) 

• All rule "actions" covered • Most common rule "conditions" covered 

• Some complicated rule "conditions" covered ("advanced", "extra" tab) 

• UPnP 

• Module 2 laboratory

• Bridging overview
• Bridge concepts and settings
• Creating bridges
• Adding ports to bridges
• Bridge wireless networks
• Station bridge
• Module 3 laboratory

• Routing overview
• Routing concepts
• Route flags
• Static routing
• Creating routes
• Setting default route
• Managing dynamic routes
• Implementing static routing in a simple network
• Module 4 laboratory

 • 802.11a/b/g/n/ac Concepts
• Frequencies (bands, channels) data-rates / chains
(tx power, rx sensitivity, country regulations)
• Setup a simple wireless link
• Access Point configuration
• Station configuration
• Wireless Security and Encryption
• Access List
• Connect List
• Default Authenticate
• Default Forward
• WPA-PSK, WPA2-PSK
• WPS accept, WPS client
• Monitoring Tools
• Snooper
• Registration table
• Module 5 laboratory

• Firewall principles
• Connection tracking and states
• Structure, chains and actions
• Firewall Filter in action
• Filter actions
• Protecting your router (input)
• Protection your customers (forward)
• Basic Address-List
• Source NAT
• Masquerade and src-nat action
• Destination NAT
• dst-nat and redirect actions
• FastTrack
• Module 6 laboratory

 • Simple Queue
• Target
• Destinations
• Max-limit and limit-at
• Bursting
• One Simple queue for the whole network (PCQ)
• pcq-rate configuration
• pcq-limit configuration
• Module 7 laboratory

• PPP settings
• PPP profile
• PPP secret
• PPP status
• IP pool
• Creating pool
• Managing ranges
• Assigning to a service
• Secure local network
• PPPoE service-name
• PPPoE client
• PPPoE server
• Point-to-point addresses
• Secure remote networks communication
• PPTP client and PPTP server (Quick Set)
• SSTP client
• Module 8 laboratory

• RouterOS tools
• E-mail
• Netwatch
• Ping
• Traceroute
• Profiler (CPU load)
• Monitoring
• Interface traffic monitor
• Torch
• Graphs
• SNMP
• The Dude
• Contacting support@mikrotik.com
• supout.rif, autosupout.rif and viewer
• System logs, enabling debug logs
• Readable configuration (item comments and names)
• Network diagrams
• Module 9 laboratory